Showing posts with label sterling silver. Show all posts
Showing posts with label sterling silver. Show all posts

Monday, February 8, 2010

Using Semi-precious Beads in Clothing


How use semi-precious stones, freshwater pearls, and crystals in your garments

Beads are often used in everyday life items that aren’t considered to be pieces of jewelry. When I think of beads that are used outside of jewelry I think of either home décor or clothing.
Most notably beads can be found on evening wear or wedding dresses. Adding beads to a special occasion dress or outfit like crystal just add some sparkle to the outfit and work to highlight certain areas by catching and reflecting the light, giving the outfit, and the person a sense of glamour. Pearls are often also found on wedding dresses as they give the dress some visual texture, and they just look so good with lace!

Beads can also be found on everyday items of clothing like tops, dresses, and even pants. They work to dress up a piece of clothing a little more, and give the consumer yet one more reason to buy that special item of clothing.
Adding beads to clothing is not all that difficult. It is often quite fun to do, and the sense of accomplishment once you are done and the piece looks amazing is well worth it. My suggestion when adding beads to an item of clothing that are going to be permanently attached to the garment is to work with a smaller sized bead. Three millimeter crystals , or size ten seed beads work well, as a rule I would not go much above four millimeters, but ultimately it is going to come down to the type of garment you are working on, and the bead that you want to use and if it will be a good fit. Three millimeter crystals , are a favorite as they are a perfect size and they give both a fun sparkle and some colour to the piece.
When sewing the beads on, work with embroidery floss, preferably the colour of the clothing item so that your stitches will disappear. Embroidery floss comes with six strands so I suggest pulling the strands apart, and sewing the beads on with either two or thee strands of the floss. Embroidery floss will be stronger then regular sewing thread, but you could also use something like nylon if you prefer.

If you want to add something to a dress, top, skirt or jacket with out making it permanent there are a few things that you can do. Not making your changes permanent will have a few benefits, the first being that it will make the item much easier to wash- with no fear of looking any of the beads in the bottom of your washing machine, and the second being that it will give you the ability to give a garment multiple looks. First you can embellish a separate piece of fabric with stones, pearls or crystals , and then using snaps or hooks you can attach the fabric to the item of clothing that you are wanting to add it on to. Another thing to do is securely attach clasps to your item of clothing, at the shoulders for a top or dress, or main seam lines for other garments, and then create strands or 'faux necklaces'. Once you are done, finish them off with soldered rings on both ends, and then you can mix and match them onto your garment.
With all of these many different techniques to try out, there are endless possibilities for the person that just simply can’t get enough of beading.

Tuesday, February 2, 2010

It's our Mardi Gras Sale!


For our annual Mardi Gras sale we thought we’d go Big & Colourful and offer you 50% off All Shells, All Coral and Fire Agate products. This includes popular and favourite products such as Abalone, Fossil Coral, Red Coral and much, much more.

To view the complete list of sale items, please visit: Stones and Findings SPECIALS

Our offer is only valid from Tuesday February 2nd, 2010 to Monday February 15th, 2010!
*Minimum order of $150.00 still applies.

Please Note: Our showroom will be closed on Monday, February 15th for Family Day. However you can still place an order online at www.stonesandfindings.com to qualify for the sale. Happy Shopping!

Wednesday, September 2, 2009

25% JEWELRY COMPONENT SALE!


From earring hooks to charms to rings!
In gold filled, gold vermeille and sterling!
http://www.stonesandfindings.com/specials

Create a Satin Finish on Sterling Silver



Then there is the satin finish. Simply take your existing component, and then you will be creating a lightly scratched surface. You can do this a couple of ways, very lightly brushed a fine S.O.S. pad – don't press to hard at first, and see the difference between the original finish, and what you have just created. If you prefer a deeper finish then press harder and continue until you like the finish you have created. When you’re satisfied with the new finish you’ve made, then proceed and complete the rest of the piece. If you have small crevices feel free to cut a small piece off and twist it, or wrap it around a cotton swab to get the recessed areas.


If you're looking to take a brushed finished surface down to high polish finish, you must use a lighter grade of emery paper to achieve a smoother look. You can even go all the way to a high polish finish and then perform your satin finish on the piece for a well finished look.





If you are going to satin finish from a high polish finish, you can mix up the finish by using some great tricks. This can put together a dynamic look, even if this is your first time trying out this method. By using a piece of masking tape, simply cut out a shape, or tape off an area that you do not want to give a satin finish and you will then create your finish that will have a fantastic contrast with in the metal itself. This method is perfect for mixing up a regular plain component and making it your own.




This finish can be mixed together with pieces that are a high polish and pieces that have a satin finish, and any other finish, like hammered that you've created for your components for your piece will have that extra stunning feature that makes your piece, truly a one of a kind.

Create Brushed Finish on Sterling Silver




The third is very similar to the satin finish , however you will use more aggressive means to obtain your new look. To create the brushed look, the finish will have more distinctive lines. You can use many things to create look. By hand you could use, and emery board or a file. Or you can use a course steel wool pad, a ball of aluminum foil or any other course metal or abrasive material.



With all of the above methods, I suggest either working at your bench, where you can clean up any metal shavings that may come off your piece. Otherwise working on a table with some newspaper down to catch the shavings is perfect. Take each piece you'd like to brush, and be sure to brush all sides, if it tends to slide, feel free to put a small amount of tape on your surface, in a loop, so it will stick to the surface and to the other side of your piece and stay still the entire time you’re brushing your component.




**Be careful with gold vermeille, as gold vermielle is sterling silver that is been plated with 14kt gold, so be wary of putting any aggressive finishing techniques as the gold may come off.

When creating your own brushed finish, it can be used in many different ways. If you're looking for a more defined look than satin, but not as rough as a hard brush with an emery board. You can complete a piece in full, and then run it through a steel wool pad, or a 3M pad. This will give it slight more edge than your regular satin finish. Or you can brush each individual piece and then put them all together. But, be sure to think of the small things, which will really bring the whole design together. Pieces that are often forgotten are components like jump rings , the clasp or the bail . These are parts that, if brushed, will complete the look. And remember, mix it up, and have fun with it!

Create a High Polish Finish on Sterling Silver




The high polish finish is often a standard finish, the reasoning is, is that this finish can be done a few different ways. A high polish finish can be used using a tumbling machine, be done by hand, or be done by a polishing wheel. A quick way to finish, and this is why it’s often a standard in so many components is that you are able to tumble these piece and in a few short A standard in jewellery components, they have often been tumbled to achieve this finish. You can use a rotary tumbler to polish jewelry and to remove burrs from jump rings or other metal components.



Materials List

  • Small rotary tumbler and barrel.
  • Soap (not detergent). Ivory soap flakes are recommended.
  • Polished steel shot. You want enough to fill the barrel about halfway.



Procedure

  • Pour the shot into a clean barrel to about the halfway mark.
  • Add enough water to cover the shot plus about 3/4 inch.
  • Add a tablespoon of soap flakes.
  • Load the jewelry and/or components into the barrel. You want them to be able to tumble, so pack them loosely.
  • Seal the barrel and let the tumbler rotate for 6-8 hours.
  • When the pieces are sufficiently polished, remove them from the tumbler and rinse them well with water.



Helpful Tips*
  • Keep your steel shot covered with soap and water. All it takes is a few hours exposed to air for the shot to develop rust.
  • Don't polish more than one chain at a time unless you derive pleasure from untangling some serious knots. You can add other jewelry in with a chain (earrings, rings, components), just don't polish chains together.
  • If you use the same barrel for jewelry as you use to polish rocks, make certain that the barrel is absolutely clean. Otherwise, you may find yourself scratching your jewelry rather than polishing it!
  • Remove chemical 'antiquing' before polishing. Otherwise, a chemical reaction can cause green deposits to coat nooks and crannies.
  • Use extreme care if you are polishing plated or filled components (e.g., silver-plated or gold-filled). You run the risk of wearing or chipping the outer layer of metal.
  • Don't tumble components with stones, as they can become scratched or dislodged from their settings.
  • However you can take this to the next level, so it will be free of knick and scratches. If you have three different grades of emery or sand paper, and a rouge cloth you will be able to reach this yourself. A Rouge Polishing Cloth and it will really bring out that shine for your components.


    When deciding on what finish to use, there's no need to only use just one. Be sure to mix up the finishes. Placing a high polish finish next to a brushed finish or even a satin finish can have a very beautiful effect and create a stunning and dynamic one of a kind piece.


    *Credit to About.com for information about tumbling jewellery
  • Friday, August 14, 2009

    Rhodium

    Discovered in 1803 by English chemist William Hyde Wollaston, Rhodium was named by its finder after the Greek word rhodon, meaning 'rose.' It is mainly found in South Africa and the Ural mountain range. Rhodium is the world's de facto #1 most expensive precious metal, and discovered in such scarce quantity that the planet sees only 3 tonnes of annual production. Amidst market fluctuations Rhodium steadily maintains a price roughly 500 times that of silver and 5 times that of platinum. In 1979, Paul McCartney's success as the best-selling songwriter of all time was recognized by the Guinness Book of World Records with the presentation of none other than a rhodium-plated record, thus demonstrating the great cultural superiority of rhodium to all other precious metals up to and including platinum.


    With an unmatchable character, it's easy to see why it's so sought after: rhodium will not tarnish or oxidize when exposed to normal levels of heat and light, and it is even immune to common corrosive substances like chlorine and fluorine that threaten other precious metals. It is also wonderfully reflective, and is frequently used as a component in optical instruments in the medical field. For all of these reasons, on top of its amazing structural rigidity, Rhodium is truly the 'rose' of the precious metal family. In the jewelry world it is commonly electroplated onto gold, copper, or silver objects to imbue them with some of its fantastic properties. The result of rhodium plated copper, for example, is a piece that combines all the durability and brilliance of pure rhodium with the common availability and low price of copper. This kind of electroplating in chains and findings puts the world's most expensive precious metal in the hands of up-and-coming designers, and around the necks and wrists of all. As an added bonus, Rhodium is hypoallergenic, and as plating it provides a protective layer for anyone sensitive to gold, nickel, or silver.


    Click here to browse Rodium Plated Silver Chains at Stones and Findings


    Click here to browse Rodium Plated Silver Findings at Stones and Findings

    Reference Charts -- A Jewelry Maker's best friend :)




    When working with jewelry, putting everything into inventory and organizing all the stuff you just bought online into your collection....you'll come across metric vs imperial increments, gages, weights -- god knows what.

    Best thing to do is print out these reference charts and keep 'em handy.
    I use them all the time so my head doesn't blow up when I receive a new shipment!


    INCHES TO MILIMETERS



    Inches Millimetres
    1/32 0.79
    1/161.59
    3/322.38
    1/83.18
    5/323.97
    3/164.76
    7/325.56
    1/46.35
    9/327.14
    5/167.94
    11/328.73
    3/89.53
    13/3210.32
    7/1611.11
    15/3211.91
    1/212.7
    17/3213.49
    9/1614.29
    19/3215.08
    5/815.88
    21/3216.67
    11/1617.46
    23/3218.26
    3/419.05
    25/3219.84
    13/1620.64
    27/3221.43
    7/822.23
    29/3223.02
    15/1623.81
    31/3224.61



    MILIMETERS TO INCHES




    Size in Millimetres Nearest Equivalent in Inches
    11/32
    21/16
    31/8
    45/32
    5 3/16
    6 1/4
    7 9/32
    8 5/16
    9 11/32
    10 3/8
    11 7/16
    12 15/32
    13 1/2
    14 9/16
    15 19/32
    16 10/16
    1711/16
    18 23/32
    19 3/4
    20 13/16




    NECKLACE LENGTHS


    Choker 16 Inches
    Princess18 Inches
    Matinee24 Inches
    Opera32 Inches
    Rope48 Inches




    WIRE GAUGES







    Gauge Inches
    (Decimal)
    MillimetresInches
    (Fraction)
    10.2897.348
    20.2586.543
    0.2506.3501/4
    0.2345.95315/64
    30.2295.827
    0.2195.5567/32
    40.2045.189
    0.2035.15411/64
    0.1884.7623/16
    50.1824.621
    0.1724.36611/64
    60.1624.115
    0.1563.9695/32
    70.1443.664
    0.1413.5729/64
    80.1283.263
    0.1253.1751/8
    90.1142.906
    0.1092.7787/64
    100.1022.59
    0.0942.3813/32
    110.0912.31
    120.0812.06
    0.0781.9845/64
    130.0721.83
    140.0641.63
    0.0631.588
    150.0571.449
    160.0511.291
    0.0471.1913/64
    170.0451.14
    180.041.02
    190.0360.91
    200.0320.81
    0.0310.7951/32
    210.0280.71
    220.0250.64
    230.0230.58
    240.020.51
    250.01790.455
    260.01590.404
    0.0160.3961/64
    270.01420.361
    280.01260.32
    290.01130.287
    300.010.25
    310.00890.226
    320.0080.2
    330.00710.18
    340.00630.16
    350.00560.142
    360.0050.13
    370.00450.114
    380.0040.1




    INTERNATIONAL RING SIZE CONVERSION CHART



    US / CanadaBritishIrishAustralian
    1/4
    1/2A
    3/4A 1/2
    1B1
    1 1/4B 1/2
    1 1/2C
    1 3/4C 1/2
    2D21.5
    2 1/4D 1/2
    2 1/2E32.75
    2 3/4E 1/2
    3F44.00
    3 1/4F 1/255.25
    3 1/2G
    3 3/4G 1/2
    4H7
    4 1/4H 1/27.75
    4 1/2I8
    4 3/4J9
    5J 1/29
    5 1/4K10
    5 1/2K 1/210
    5 3/4L11.75
    6L 1/21112.75
    6 1/4M12
    6 1/2M 1/21314
    6 3/4N
    7N 1/21415.25
    7 1/40
    7 1/20 1/21516.5
    7 3/4P
    8P 1/21617.75
    8 1/4Q
    8 1/2Q 1/217
    8 3/4R19
    9R 1/218
    9 1/4S20.25
    9 1/2S 1/219
    9 3/4T21.5
    10T 1/220
    10 1/4U21
    10 1/2U 1/22222.75
    10 3/4V
    11V 1/223
    11 1/4W25
    11 1/2W 1/224
    11 3/4X
    12X 1/22527.5
    12 1/4Y
    12 1/2Z2628.75
    12 3/4Z 1/2
    1327
    13 1/4Z1
    13 1/2
    13 3/4Z2
    14Z3
    14 1/4
    14 1/2Z4
    14 3/4
    15
    15 1/4
    15 1/2
    15 3/4
    16


    LENGTH AND WEIGHT MEASUREMENT CONVERSION CHART


    To Convert...Into...Multiply By...
    centimetresinches0.394
    feet0.0328
    metres0.01
    millimetres10
    metrescentimetres100
    feet3.281
    inches39.37
    inchescentimetres2.54
    feet0.0833
    metres0.0254
    yards0.0278
    yardsinches36
    feet3
    metres0.914
    grammesounces0.035
    pounds0.002
    kilogrammes0.001
    ouncesgrammes28.35
    pounds0.0625
    kilogrammes0.028
    poundsgrammes453.59
    ounces16
    kilogrammes0.454



    WIRE WRAP STRENGTH STANDARDS



    Wire Guage Acceptable WeightStretch-Causing Weight
    26 dead soft350g400g
    26 soft450g500g
    26 half hard600g650g
    26 hard900g1000g
    24 dead soft1250g1500g
    24 half hard1700g2000g
    22 soft4000gover 4000g




    WIRE GAUGES VS. STONE AND DRILL HOLE SIZES


    Stone SizeHole Diameter (mm)Wire Guage #Wrap Times
    smallless 0.5261
    small0.5 ~ 0.8262 ~ 3
    medium0.8 ~ 1241
    medium1.1 ~ 1.5242 ~ 3
    medium ~ big1.6 ~ 1.8221
    medium ~ big1.9 ~ 2.5222 ~ 3
    bigover 2.5201 ~ 2



    There are obviously so many other charts you'd probably need, but I find that these are the ones I need the most! Feel free to contribute!

    Wednesday, July 29, 2009

    Jewellery Sales in an Economic Downturn



    Recently, I've been asked by a number of customers about how our sales have been at Stones and Findings. They've wondered if the economic downturn has affected the sales of our jewellery components. Some have mentioned that their sales have been affected, and a number of component suppliers have also seen their sales plummet. Stones and Findings' year over year monthly and tradeshow sales have, in fact, increased dramatically. It is an interesting, and a happy, situation and I've spent a bit more time looking into the reasons behind this. I want to do more of what we're doing right, and if there are any formulae or secrets that can be transferred from the jewellery component wholesale business to jewellery designing and sales business, I'd like to share them with our customers.

    credit: InAccessories.com


    I realize the economy has been tough recently, and may continue to be so for a while. Jewellery purchase is a discretionary spending for the most part. However, historically, when the economy has been poor, we find that sales of certain things that beautify our world increases. They are pick-me-ups, and help remind us that we're still going to be okay. I do believe that jewellery is one of these things, and I know some people who swear by it. I've spoken to many boutique owners and chain store buyers, some of whom carry other categories of merchandise such as clothing and giftware. They are finding that instead of buying entire wardrobes, customers are buying pieces of jewellery that accent and update their current wardrobe. It is less expensive and more fun.


    credit: InAccesories.com

    However, if you look at it more closely, the items that get squeezed out are mainly the very low end, disposable pieces, and the very expensive. Customers are buying fewer jewellery pieces than before. However, they're buying items that represent something, that resonate with sense of well being. As a result, boutiques that are carrying the unique, locally made (representing Canadian jobs), and pretty things are faring better than chain stores that import the mass production jewellery designs. People already have the mundane. They're certainly not going to spend further limited dollars on buying what they already have. They will, however, spend on jewellery pieces that are different and make them feel good about themselves and about wearing them. They are still cautious about prices, and they won't stock up huge quantities, but they will purchase the right things. This said, as jewellery designers, our customers are right to monitor the situation carefully, and make their selections wisely. Their designs must be unique, and priced well. The components they choose must be different and also priced competitively. And I think that is why our jewellery component wholesale business has been almost doubling.



    New customers do test orders with us even though they don't want to bother switching from their current suppliers for a few cents less. However, they have never seen many of our jewellery components elsewhere. We create a number of our own jewellery findings, and we are making more and more of these because of how popular they've proven to be. Customers come back and place ever increasing orders because they realize how easy it is to make different and elegant jewellery designs when they have the right components to begin with. We are finding more and more customers switching a greater percentage, if not entirely, to Stones and Findings. And this is very satisfying. We know we have unique components that are well made and well priced. Our quickly expanding

    Gold and Silver in the 21st Century Economy...

    ...and what it Means to the Accessories Industry



    by: Damien Zielinski



    Precious metals have always commanded the attention of both stock market traders and jewelry aficionados alike, but until recently the two have been mutually exclusive. As we bear witness to a continuing surge in the market value of gold and sterling silver and prices that are at an all-time high, it seems that exchanges normally confined to trading floors will be the topic of conversation at showrooms and boutiques… whether the jewelry community likes it or not.



    Never insulated from concepts of money and riches, gold and silver have been symbols of wealth, prestige, and beauty since antiquity. Instantly recognizable and culturally transcendent, these precious metals seem to epitomize luxury. While it could be possible that the most beautiful minerals happen to be the most rare and expensive, the truth is that interest in precious metals is also caused, quite simply, by their scarcity: they are, by definition, precious in this world, and occur in limited quantity. If one should wear a gold chain around his neck, they are not only making a stylistic statement with the highly reflective and tantalizingly coloured element, but are also to some degree aligning their image with the kings, queens, pharaohs, and emperors who have been adorned by gold in the past. To wear gold is to say 'I can afford to wear gold.' However, the high market worth of pure gold only means so much when low karat alloys, plating, and gold vermeil enter the picture: one can look like royalty without necessarily footing a royal bill. With such innovations, it is difficult to assess whether or not gold still bears any meaningful imperial association with monarchs of old, but surely these impressions still linger, to some degree, in the subconscious of modern jewelry wearers, designers, and observers. The history and culture of the metal is simply so long and so rich that such connotations will always be ingrained in the collective mind.



    Another complicating factor in the unfolding stories of gold and silver is that of their use as currency in the premodern era. With the establishment of Lydian mints in 700 BC, the precedent was set, and the association of silver with monetary value was inherited by countless civilizations. The words 'silver' and 'money' are synonymous in at least 14 different languages, and the contemporary stock exchange still uses gold as a benchmark litmus indicator for the market as a whole. Banks still carry gold bullion, and your grandparents probably have at least one silver dollar lying around somewhere. While it seems preposterous to actually wear money, no one is bothered by the time-honoured duality of gold and silver as fashion accessories and units of currency both. Yet, there is a kind of tension in this double nature: while the cultural appreciation of gold and silver has remained relatively unchanged, enjoying what seems to be permanent appreciation in the jewelry industry throughout transient fads and passing fashions, the market value of both metals is notoriously unstable.



    Investors and traders are used to sitting on edge as numbers rise and fall, but there is less awareness of gold and silver's market worth for ground-level jewelry consumers. The reason for this is that global market-level fluctuations in value are not reflected in the prices of wholesale jewelry components at a rate that expresses the actual speed of market changes. In other words, while silver prices change daily, a jewelry designer may only buy silver components monthly. Something like gasoline, for example, is constantly priced based on market value, keeping the everyday consumer in touch with stock exchange realities, but precious metals have the effect of incremental increases and decreases that correspond with the rate of wholesale purchases. So, while wholesalers of components tend to buy silver and gold at prices directly dictated by market worth, a desire to remain competitive and shock repeat customers as little as possible causes more sporadic price increases than are actually representative of silver's true value at any given time.

    As the bull market keeps rising, precious metals grow even more expensive, and wholesalers are unable to break even without raising prices. Having to shell out more for the same metal goodies may frustrate small businesses and amateur designers, and can come at some consternation if the market forces aren't understood. 'If silver and gold prices have always been changing, and the price hasn't significantly affected the consumer,' one might ask, 'why should prices go up so much now? And after all, couldn't market values go back down just as suddenly?'

    It is always possible, and the stock exchange is naturally defined by unpredictability, but recent trends seem to suggest otherwise: since the spring of 2000, gold and silver have both more than doubled in worth, standing in contrast to a long period of relative stability since the last big spike in 1980. The central cause of the increase has been widely credited to a huge surge in demand associated with new and expanding markets in parts of the world that, previously, did not account for nearly as much jewelry consumption.


    credit: http://www.palagems.com/gem_news_2007_v1.htm

    India and China, especially, have recently witnessed a tremendous growth of the middle class, and a proportionate demand for things that such families crave, like travel, services, and luxury commodities. In attempting to explain the impact of this rising consumerist presence on the prices of gold and silver, some have pointed, for example, to gold's historic prominence in Chinese culture, and the resulting love of it that courses through the veins of Chinese people and transcends visual appeal. It is also said that Indian culture is even more reverent to precious metals, and that certain Indian ceremonies like weddings tend to spur gold purchase on such a large scale that stock market spikes can actually be mapped on a calendar. Whether or not investigations into localized histories and cultural stereotypes are even necessary, truthfully, is debatable at best. The simple reality is that enormous populations of jewelry wearers have exploded onto the scene, and their demand for gold and silver don't need any 'deeper' explanation. Statistics also show that demand for silver is actually going down in other fields, such as photography, which due to increasing digitization relies less and less on silver nitrate.

    This rise in demand is occurring against the backdrop of an actual increase in the production of precious metals- 2005 saw, for example, an all time high in silver output. It has been recorded that 50% of all gold produced in history has been mined after 1960. Both of these figures demonstrate that increasing scarcity is not the issue; these things have never been more readily available. Almost all 'scrap' silver and gold is melted down and reused, so not only are we producing more, but we tend to lose almost none. With such extraordinary abundance, it seems as though prices should be going down. Unfortunately, the wealth in supply is met by an even greater presence of global demand, and therein lies the rub.

    There is just no way around the fact that everyone loves to adorn themselves with gold and silver, and with record-breaking demographic transitions, millions more are suddenly able to afford it. The results are a stubborn bull market offering no sign of relent, and sweeping price changes that can no longer sit under the radar of designers and artists who would rather focus on fashion trends than those of the stock market.

    Thursday, July 16, 2009

    Sterling Silver Beads

    Silver Beads

    Silver Beads allow for great accents to Jewellery Making. They come in all shapes, sizes and forms, and from different countries. Silver Beads make great accompaniment for Semi-precious Stone Beads , Fresh Water Pearls and crystals, because of the contrast in lustre and texture. Silver Beads is an effective and inexpensive way to add accent to earrings.




    Shiny Silver Beads





    Some of the best shiny Silver Beads come from Italy. They are machine made, and are seamless. Italians are known for their laser cut Silver Beads. They reflect light like a funky disco ball. Satin Silver Beads add a feeling of luxury. However, satin Silver Beads are difficult to clean once they have tarnished. Most Italian silver is plated or coated for anti-tarnish. Chinese factories produce excellent Silver Beads, but usually they are not coated in lacquer and tarnish faster than Italian Silver Beads.



    Antique Silver Beads





    Some of the best antique Silver Beads come from Bali. This style of antique and intricate Silver Beads is famously known as Bali Beads. However, many similar Silver Beads are made in India, but some still call them Bali Beads, when they are in fact, not made in Bali at all. You can tell the difference between Silver Beads made in India from those made in Bali. Bali silver is generally better quality, and more intricate. Generations of Indonesians have been making Silver Beads in their homes. The craft has been passed from generation to generation. Indian Silver Beads have come on the market in the past decade as a cheaper alternative, however, their quality has been improving and they are gaining a larger share of the Silver Beads market.



    Shiny Brushed Silver Beads





    Indians have been making brushed hollow Silver Beads, which have become very popular with the North American Jewellery Making crowd. They are modern, and lend an update look to the venerableSilver Bead. These Silver Beads work very well with Silver Chains and crystals and stones. They lend a clean look to balance colours and unusual shapes.



    Hollow-form Silver Beads





    Some of the most interesting hollow-form Silver Beads from Isreal. Stones and Findings carries a large variety of Isreali hollow Silver Beads, to see a sample: Sterling Hollow Bead. Instead of casting from a rubber mould, Silver Beads is made in was, lightly painted in a conductive paint, and sat in the plating tank for hours. A heavy layer of Silver is formed on top of the wax shape. The wax is then melted and dripped out of a hole in the Silver Beads. What you're left with is just the Silver in the Silver Bead. It is a much more labour intensive process, and will cost more per gram then solid Silver Beads. However, the bead requires a lot less silver. Hollow Silver Beads are less expensive, thus cost effective for larger shapes.

    Silver Earring Components

    Silver Earring Components
    by C.S.



    There are limitless possible earring designs. However, popular Earrings have certain Jewellery Components in common. These Jewellery Components fall under the general categories of: Earring Hook component, and Findings, and sometimes Chains for longer earrings.



    Earring Hook Component





    This is the Earring Component that attaches the earring to the ear. It can be in the form of a Earring Hook, Earring Stud, Clip-On Backing. Stones And Findings carry a number of Silver Earring Hooks, Silver Leverbacks, and Silver Earring Studs. Sterling Silver Earring Findings, as well as Gold-Filled Earring Hooks and Gold-filled Leverbacks, and Gold Filled Earring Studs Gold Filled Findings.



    Open ended Sterling Silver Earring Componentsallow for Semi-precious stone beads crystals to be inserted, and then a loop to be made for additional Earring Drops to be added. This allows for rather unusual accents for your Earring Designs.




    Leverback Earring Components





    Leverback Earring Components are wonderful and preferred by many Jewellery Designers because they don’t fall off the ear no matter how active the wearer is, and no matter how much their ear piercing has been stretched. The best Silver Leverback Earring Components come from Italian and Chinese factories, using Italian machines. Stay away from Silver Leverback Earring Components made in India, Thailand, and Bali. The spring mechanisms are not as strong, and don't spring back the way Italian machine made ones do. The price difference for Silver Leverback Earring Components is negligible, but the quality is highly noticeable.



    Earring Studs





    Earrings Studs are sometimes preferred to Earring Hooks, especially for those whose ear piercings have been stretched. The Earring Stud hides the stretched holes, which Earring Hooks do not. Silver Earring Studs and Gold-Filled Earring Studs are better than base metal because they come into contact with the skin. Some people are allergic to base metals, and even if there is a protective plating, the inside metal will leech out, sometimes changing the colour of a person’s skin. Earring Studs have more contact area with the skin.

    Saturday, July 11, 2009

    Sterling Silver Wire




    Silver Wire is one of the single most useful Jewellery Components ever invented. Stones And Findings has a variety of shapes and gauges Sterling Silver Wire. In Jewellery Making, Silver Wire can be used to weave, connect components, thread beads, tie and frame, and embellish beads. Silver Wire can also be hammered and twisted into shapes and be, in itself, the centre of the Jewellery Design.

    SHAPES OF STERLING SILVER WIRE



    Round Silver Wire





    Round Silver Wire is the most commonly used in Jewellery Making. As most bead holes are drilled round, round Silver Wire fits the best. Unlike square Silver Wire, round Silver Wire will not show edges and you don't have to worry about misalignment. Round Silver Wire is the best for beginners. They are also the most readily available of all Silver Wires. They come in spools, coils, and foot-length straight pieces.

    Square Silver Wire





    Square Silver Wire are needed in certain projects where round Silver Wire just will not work. For example: when you need hanging pieces not to swing or swivel. You can use Square Silver Wire as the cog that fits into a square hole. Square Silver Wire also produces a nice faceted look for fancy wire wrapping.

    Half Round Silver Wire





    Half Round Silver Wire is available at some specialty bead stores. It has some properties of the square Silver Wire when you need things secured, but also can provide the aesthetics of round wire when wrapped.

    Sterling Silver Wire Hardness



    Silver Wire is generally available in 4 grades of hardness: hard, half hard, soft, dead soft.

    When to use Harder vs Softer Silver Wire



    With thicker Silver Wire, it is better to work with soft or dead soft wire. Hard Silver Wire, in thicker gauges is very difficult to manipulate. For thinner Silver Wire, you have more flexibility. Depending on your project, you should select Silver Wire hardness accordingly. If you wire wrapping many little light weight pearls or beads, you should use soft or dead soft if the beads are very small. The harder the Silver Wire, the more difficult it is to manipulate, so if you're making many wraps, it will get tiring if the Silver Wire is hard. If what you're wrapping is heavier, and you need it to be more secure, use harder Silver Wire. It won't bend or unwind as easily. If the holes in the beads are larger, then you can use thicker Silver Wire that is soft. However, the Silver Wire will cost more.

    How to make Silver Wire Harder or Softer



    The process of making Silver Wire harder is called Tempering. You can do this yourself by hammering, or tumbling. The more you manipulate Silver Wire, the stiffer it becomes.

    The process of making Silver Wire softer is called Annealing. This would be done by exposing the Silver Wire to high heat, such as a flame. This will re-align the molecules of the Silver Wire. Annealing is one of the basic techniques learned in a silver-smith class. It is essential to working with silver, and it is not as easy as tempering, and requires a lot more equipment. Fortunately, Silver Wirecan be ordered already soft.

    Thursday, July 9, 2009

    Creating Your Own Patina for Sterling Silver Jewellery

    by Elizabeth Meister

    If you want to darken the surface of your sterling silver jewellery components or jewellery designs quickly you can use a few different methods. These methods include the boiled egg method, the kitty litter method and the shower method.

    The Boiled Egg Method
    The most important part of this method in darkening the surface of your sterling silver jewellery includes the use of the yolk. You can choose to separate the white if you want to use it for something else - as the egg will not be edible after you perform this method!


    credit: http://www.jewelrylessons.com/node/701


    For this method, you need to take a resealable container or bag; then, after separating the egg white from the yolk break the yolk or mix it, and put your sterling silver jewellery inside the bag together with the yolk.

    Your sterling silver jewellery can touch the egg; don't worry about contaminating it. After waiting 10 minutes, you will start to notice that your sterling silver jewllery will start to change and you can wait as long as 10 hours, developing a darker colour gradually.

    TIPS - Be sure to clean your sterling silver jewellery well before putting it together with the yolk. This will help in creating a more even coat.

    The Kitty Litter Method
    The key component to this method is the ammonia found in the urine of your pet. Therefore, you need to create an air tight environment, above which your sterling silver jewellery can hang. You will also need a bowl, that you can throw away after, and a large zip-lock bag. Fill the bowl with kitty litter, hang your sterling silver jewellery above it, and cover with a zip-lock bag. If you want a much faster reaction, bury your sterling silver piece in the kitty litter, let it stand a few minutes and clean well after the procedure is complete.

    credit: Sanrio

    TIPS - If you would prefer not using this method, you can use different liquids to saturate your sterling silver jewellery such as old wine, ammonia, or sour milk. Saw dust is also a good alternative to kitty litter as well.

    The Shower Method
    If you have a few weeks of time to dedicate to your method, consider the shower method. Simply, hang your sterling silver jewellery in your bathroom and over a few weeks time it will naturally patina itself.

    And if you don't like your home made patina finish for your sterling silver jewellery, you can always use the pre-packaged patina. Liver of Sulfur can be found at most jewellery supply stores. Just take a small amount of Liver of Sulfur and mix it with a cup of water and dip and re-dip your sterling silver piece into the solution until you've reached the desired colour. You can also create a wide variety of colours by simply warming up the liquid before dipping inn your sterling silver jewellery.

    After you have created the patina on your sterling silver piece, feel free to experiment with baking soda on your finished surface.

    Creating your Own Hammered Finish



    Creating your own hammered finish on sterling silver, gold filled or gold vermeille components is easy.


    For the following , I will be using sterling silver as examples. Since there are many different types of hammer heads, this leads to an endless list of possibilities! Some tools you can consider to change the look are: a ball peen hammer, a flat nose hammer, a rawhide hammer, or a wooden hammer. Each hammer will give your sterling silver, gold filled or gold vermeille component a different result. When you are hammering your metal, try out a couple different bases underneath. You could use a piece of wood, which is a soft base, and this will provide some give to the metal, and it can bend. Depending on where you hammer your sterling silver, it can move the metal in small amounts. Try it out on a test piece to see what type of hammer dent will provide what you're looking for.

    Another base is a steel block. When hammering on the steel block you will not only be creating a finish on the side you are hammering, but you will also be creating another finish on the side of the sterling silver component that is facing the steel.



    *TIP* if you do not want to dent your hammer or your anvil's finish, put some masking tape on the surface you will be using, it will lessen the likelihood of you damaging your tools.

    There are many bases that will give different looks pending on the hammer and the amount of resistance your surface will give. I've used a hockey puck as a base once, so I was able to easily give a hammered effect to one side of the sterling silver component, yet the other side was not affected and did not dent the same way as if it was on a harder surface like a steel block.

    *TIP*Keep in mind when holding your hammer, do not point out your index finger, since this can result in injury. You want to hold the hammer at the end of the handle for the most effective hit. And be sure to use your whole arm and elbow. Misuse of a hammer can often result in wrist injuries as well.




    A ball peen hammerhead will create metal divots, and pending on the size of your hammerhead, you can have something similar to pointillism or even something large like a creator and everything in between. With this you can create many unique and diversified looks on your sterling silver components.



    A flat nose hammerhead will create a line. This type of simple mark can be used for a wide range of designs. For example you can fan out the pattern on your sterling silver component, or you can crisscross it like a pile of sticks.




    Feel free to try out this technique, I guarantee you will have a lot of fun with it, and it can also be a great stress reliever!